3 Way Ball Valve – L Port & T Port
A 3-Way Ball Valve has three ports and is used to divert, select, mix, or distribute fluid flow. The internal ball design determines the flow pattern: L-Port is mainly for flow selection/diversion, while T-Port provides more flexible diverting, mixing and distribution.
| Valve Type | 3-Way Ball Valve |
| Port Configuration | L-Port / T-Port |
| Valve Function | Flow Diversion / Mixing / Flow Selection |
| Number of Ports | 3 |
| Operation | Manual Lever / Pneumatic / Electric Actuator |
| Operating Method | 90° Quarter Turn |
| Flow Direction | Multi-directional |
| Port Design | L-Port / T-Port |
| Body Material | Carbon Steel / Stainless Steel / Brass |
| Ball Material | Stainless Steel / Chrome-Plated Steel |
| Seat Material | PTFE / RPTFE / PEEK / Other Options |
| Seal / O-Ring | FKM / Viton / NBR / PTFE |
| End Connection | BSP / NPT / Flanged / Socket Weld / Other |
| Nominal Size | Typically 1/4" to 2", depending on design |
| Pressure Rating | Application and size dependent; commonly Class 150–600 in industrial designs |
| Temperature Range | Depends on body, seat and seal material |
| Flow Pattern | L-shaped or T-shaped |
| Mounting | Inline / Panel / Actuator Mounting |
| Application | Industrial, Hydraulic, Chemical, Oil & Gas, Water Treatment |
| Flow Pattern | L-shaped |
| Main Function | Divert / Select |
| Flow Selection | One port to either of two ports |
| Mixing | Generally not suitable |
| Flow Splitting | Limited |
| Typical Use | Changeover / Selection |
Used in various industrial applications, such as: